Lifebreath 200ERV User Manual download pdf (Page 14)

To select mode of operation for ControlAir 15

Press and hold the fan selection button on the Control Pad. After 5 seconds the control will

begin to cycle each mode holding each for 2 seconds. Release the button when the desired

mode of operation is reached.

Modes of Operation LED Indication

OFF No LED’s illuminated HRV/ERV is off, no controls will

initiate operation.

Standby / On Steady Green LED and Yellow LED to indicate speed

HRV/ERV will run at speed selected in ventilation mode.

Standby mode is indicated by no speed indicator

illuminated. Optional remote controls will override standby

or selected speed into high speed.

20 On / 40 Off Flashing Green LED and Yellow LED to indicate speed.

HRV/ERV will operate in ventilation mode at speed selected

for 20 minutes and OFF for 40 minutes.

Recirculation Steady Red LED and Yellow LED to indicate Speed.

*Note: Not available on all models

HRV/ERV

will operate in recirculate mode at the selected

speed. Optional remote controls will override unit into high

speed ventilate mode.

To select speed

Momentarily press fan selection button and release. HRV/ERV will move into next speed.

OFF is indicated by no yellow LED illuminated. Speed 1 is the first yellow LED. Speed five is

indicated by a flashing speed 4 LED.

Automatic Defrost

During cold outdoor conditions the

HRV/ERV

will occasionally go into an automatic defrost

function, which will prevent ice from forming on the core. Defrost is indicated by a flashing Red

LED indicator.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Lifebreath 200ERV User Manual Page 14