Lifebreath 95MAX User Manual download pdf (Page 26)

26

Push and turn with slotted

screwdriver. Damper

automatically locks when

pressure is released.

When connecting ductwork

to the collar, take note where

screws are located. Screws

should be located no further

than 1/2” from outside edge

of collar, so as not to impede

operation of the damper.

1/2”

Hard/Rigid

ducting

Insulated flexible

ducting

Balancing Collar Instructions

Installations where the HRV is ducted directly to

the return of a furnace may require additional

dampening on the fresh air to building duct.

This is due to the high return static pressures

found in some furnace installations.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments