Lifebreath 200ERVD User Manual download pdf (Page 13)

To select mode of operation for ControlAir 15

Press and hold the fan selection button on the Control Pad. After 5 seconds the control will begin

to cycle each mode holding each for 2 seconds. Release the button when the desired mode of

operation is reached.

Modes of Operation LED Indication

OFF

No LED’s illuminated

ERV is off, no controls will initiate

operation.

Standby / On S

teady Green LED and Yellow LED to indicate speed

ERV

will run at speed selected in ventilation mode. Standby mode is

indicated by no speed indicator illuminated. Optional remote

controls will override standby or selected speed into high speed.

20 On / 40 Off

Flashing Green LED and Yellow LED to indicate speed.

ERV will operate in ventilation mode at speed selected for

20 minutes and OFF for 40 minutes.

Recirculation

Steady Red LED and Yellow LED to indicate Speed.

ERV

*Note: Not available on all HRVs

will operate in recirculate mode at the selected speed. Optional

remote controls will override unit into high speed ventilate mode.

To select speed

Momentarily press fan selection button and release. ERV will move into next speed. OFF is indi-

cated by no yellow LED illuminated. Speed 1 is the first yellow LED. Speed five is indicated by a

flashing speed 4 LED.

Automatic Defrost

Not on all Erv’s

During cold outdoor conditions the ERV will occasionally go into an automatic defrost function, which

will prevent ice from forming on the core. Defrost is indicated by a flashing Red LED indicator.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Lifebreath 200ERVD User Manual Page 13